Berufsbekleidung, Hemd, Bluse

Shirts & blouses.

 
apparel

In the ordinary working life, shirts and blouses for corporate wear and workwear are mostly made with easy-iron and non-creasing finishes. This requires the seams to be extra smooth and even. These garments come under stress during work and then again during professional laundering and ironing, especially the collars, cuffs and button panels. AMANN has found individual and economically attractive solutions for this, too.

 

AMANN sewing thread recommendation

As a universal sewing thread for shirts we recommend sabac 120 in combination with sabaTEX 120 for serging. Depending on the shirt fabric and the sewing conditions such as the stitch density and stitch type, it might be worthwhile selecting other qualities from the AMANN range:

  • for the finest fabrics and non-iron qualities sabac 150 or Serafil 120/2
  • for embroidering logos ISACORD, ISAMET 40 and Serafil 200/2

 
productfinder.

 

Standard seam plan for blouses/shirts

Nahtart Stichbild Stichtyp Nadelfaden Spulen- bzw. Greiferfaden Nadel-
stärke Nm
      Produkt Etikett Nr. Tex Nr. Produkt Etikett Nr. Tex Nr.  
 
120 24 120 24 70
 
120 24 120 24 70
 
120 24 120 18 70
 
120 24 120 24 70 - 80
 
120 24 70 - 80

Standard thread requirement

Blouses
Total: 100 - 150 m
Closing and topstitch seams: 65 m
Serging seams: 55 m

Shirts
Total: 115 - 150 m
Closing and topstitch seams: 45 m
Serging seams: 80 m

Our service for you:

Sewing thread recommendations for your specific fabric and sewing parameters and thread requirement calculations are available on request from AMANN's technical sewing service.

 
copyright 2013.

AMANN & Söhne GmbH & Co. KG
Hauptstraße 1
D-74357 Bönnigheim
Phone +49 7143 277 0
Fax +49 7143 277 200
E-Mail: service@amann.com