Sewing threads for saddles, bridles and equestrian equipment
Saddles, bridles, halters and saddle pads are exposed to high mechanical loads, constant movement and everyday wear. Especially in highly stressed areas, seams must remain strong and reliable while also meeting high visual standards. Moisture, perspiration, UV radiation and changing weather conditions can place additional demands on equestrian equipment.
AMANN offers sewing and embroidery threads for a wide range of equestrian applications. Serafil is the universal sewing thread recommendation for saddles, bridles and halters, while Saba is recommended for saddle pads. Depending on the application, seam position and operating conditions, additional AMANN products can be selected.
Saddles
AMANN sewing thread recommendation for saddles
Saddles are exposed to high mechanical stress, repeated movement and continuous use. Closing seams must provide reliable strength, while visible topstitch seams also contribute significantly to the appearance of the finished saddle.
For the applications shown below, AMANN recommends Serafil in different thread sizes depending on the seam position and material. Serafil is a polyester continuous filament sewing thread offering high seam strength, reliable sewing performance and precise stitch formation.
Depending on the individual demands in use and the sewing conditions, it might be worthwhile selecting other qualities from the AMANN range:
Serabond, Strongbond, Rasant-Oxella, Onyx or Serabraid in the corresponding range of tickets
| Seam no. | Seam type | Stitch type | Needle thread | Bobbin or looper thread | Needle size min. Nm | Needle size min. No | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Article | Ticket no. | Tex no. | Article | Ticket no. | Tex no. | |||||
| 1 | Closing seams | 301 lockstitch | Serafil | 10 | 270 | Serafil | 10 | 270 | 180 | 24 |
| 2 | Topstitch seam | 301 lockstitch | Serafil | 8 | 350 | Serafil | 20 | 135 | 200 | 25 |
Bridles & Halters
AMANN sewing thread recommendation for bridles and halters
Bridles and halters contain highly stressed components that are exposed to pulling forces, movement and frequent handling. Their seams need to combine reliable mechanical performance with a clean and consistent appearance.
For the decorative and topstitch seams shown below, AMANN recommends Serafil Ticket 10 / Tex 270 with a 301 lockstitch.
Depending on the individual demands in use and the sewing conditions, it might be worthwhile selecting other qualities from the AMANN range:
Serabond, Strongbond, Rasant-Oxella, Onyx or Serabraid in the corresponding range of tickets
| Seam no. | Seam type | Stitch type | Needle thread | Bobbin or looper thread | Needle size min. Nm | Needle size min. No | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Article | Ticket no. | Tex no. | Article | Ticket no. | Tex no. | |||||
| 1 | Decorative/topstitch seams | 301 lockstitch | Serafil | 10 | 270 | Serafil | 10 | 270 | 180 | 24 |
Saddle Pads
AMANN sewing thread recommendation for bridles and halters
Bridles and halters contain highly stressed components that are exposed to pulling forces, movement and frequent handling. Their seams need to combine reliable mechanical performance with a clean and consistent appearance.
For the decorative and topstitch seams shown below, AMANN recommends Serafil Ticket 10 / Tex 270 with a 301 lockstitch.
Depending on the individual demands in use and the sewing conditions, it might be worthwhile selecting other qualities from the AMANN range:
Serabond, Strongbond, Rasant-Oxella, Onyx or Serabraid in the corresponding range of tickets
| Seam no. | Seam type | Stitch type | Needle thread | Bobbin or looper thread | Needle size min. Nm | Needle size min. No | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Article | Ticket no. | Tex no. | Article | Ticket no. | Tex no. | |||||
| 1 | Quilting seams | 301 lockstitch | Saba | 80 | 40 | Saba | 120 | 24 | 80 | 12 |
| 2 | All other seams | 301 lockstitch | Saba | 50 | 60 | Saba | 80 | 40 | 90 | 14 |
| 3 | Embroidery | - | Isacord rec | 40 | 27 | Isa | 150 | 18 | 65 | 9 |
Wait… AMANN threads are used here? | Equestrian gear
Requirements for sewing threads in equestrian equipment
The sewing thread is an important part of the overall construction of saddles and horse equipment. Depending on the application, material and seam position, requirements may include:
- high seam strength
- high abrasion resistance
- reliable performance under mechanical stress
- durable and consistent stitch formation
- reliable sewing performance
- suitability for closing and decorative seams
- resistance to environmental exposure where required
- an attractive seam appearance for visible seam positions
The right combination of sewing thread, thread size, stitch type, needle size, material and seam construction helps ensure durable seams and reliable performance throughout everyday use.
Choosing the right sewing thread for equestrian equipment
There is no single thread size or sewing parameter suitable for every saddle or item of horse equipment. The appropriate solution depends on several factors, including:
- type of equestrian equipment
- material and material thickness
- expected mechanical loads
- abrasion exposure
- seam position and construction
- closing, topstitch or decorative seam
- stitch type and stitch density
- required seam appearance
- environmental exposure
- thread size
- needle size
Highly stressed areas such as saddles, bridles and halters may require different thread properties and sizes than textile applications such as saddle pads.